Black Box Hardened Managed Ethernet Switche Computer Hardware User Manual


  Open as PDF
of 208
 
724-746-5500 | blackbox.com
Page 169
Chapter 7: Command-Line Management
SNMP v3
SNMPv3 No-Auth:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Add a user using snmp v3 with read-only or read-write access mode and without authentication. Use the no form of the com-
mand to delete this user.
3. Command Syntax:
(no) snmp-server v3-user USERNAME (rorw) noauth
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
4. Example:
The following example adds a user (myuser) using snmp v3 with read-only access mode and without authentication:
switch_a(config)#snmp-server v3-user myuser ro noauth
switch_a(config)#
SNMPv3 Auth-MD5, SNMPv3 Auth-SHA:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Add a user using snmp v3 with read-only or read-write access mode and with MD5 or SHA authentication. Use the no form of
the command to delete this user.
3. Command Syntax:
(no) snmp-server v3-user USERNAME (rorw) auth (md5sha) AUTH_PASSWORD
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
md5 authentication method
sha authentication method
AUTH_PASSWORD authentication password
 previous next