Filter
Top Products
724-746-5500 | blackbox.com
Page 52
Chapter 6: Web-Based Browser Management
Figure 6-36.
RSTP Port Setting
1. STP Version: Choose “RSTP” from the “STP Version” drop-down list.
2. Port: Choose a port from “Port” drop-down list.
3. Priority(Granularity 16): Click in the “Priority” text box and enter a value between 0 and 240 to set the priority for the port. A
higher priority will designate the port to forward packets first. A lower number denotes a higher priority. This entry must be
divisible by 16. The default priority setting is 128.
4. Admin. Path Cost: Click in the “Admin. Path Cost” text box and enter a value between 0 and 2000000 to set the Admin. Path
Cost for the port. 0 (auto) - Setting 0 for the Admin. Path Cost will automatically set the speed for forwarding packets to the
port for optimal efficiency. The default port cost: 100 Mbps port = 200000. Gigabit port = 20000.
5. Point to Point Link: Choose “Enable” or “Disable” from “Point to Point Link” drop-down list to enable or disable Point to Point
Link for the port.
6. Edge Port: Choose “Enable”, “Disable”, or “Auto” from “Edge Port” drop-down list to set Enable, Disable, or Auto Edge Port
for the port.
7. Update Setting: Click on the “Update Setting” button when you finish RSTP Port Setting.