Filter
Top Products
724-746-5500 | blackbox.com
Page 57
Chapter 6: Web-Based Browser Management
Figure 6-43.
MSTP Port Setting
Port Instance Configuration
1. Instance ID: Click on the “Instance ID” drop-down menu to choose instance ID from the “Instance ID” drop-down list.
2. Click ports to assign ports to the corresponding instance ID.
3. Update Setting: Click the “Update Setting” button when you finish Port Instance Configuration.
Instance ID
1. Instance ID: Choose instance ID from “Instance ID” drop-down list.
MSTP Port Configuration
1. Port: Choose a port from the “Port” drop-down list.
2. Priority (Granularity 16): Click in the “Priority” text box to set the port priority for a bridge group. The Multiple Spanning Tree
Protocol uses port priority as a tiebreaker to determine which port should forward frames for a particular instance on a LAN, or
which port should be the root port for an instance. A lower value implies a better priority. In the case of the same priority, the
interface index will serve as the tiebreaker, with the lower-numbered interface being preferred over others. The permitted range
is 0–240. The priority values can only be set in increments of 16.
3. Admin. Path Cost: Click in the “Admin. Path Cost” text box to set the cost of a path associated with an interface.