Filter
Top Products
Print Modes and Options
Print Modes
120
14068L-001 Rev. A X-Plus II User Guide 1/11/07
Remove Media Liner from the Rewind or Peel Spindle
Rewind mode and Peel-Off mode each use spindles to wind used media liner. Remove the
media liner from the spindle each time that you change labels.
To remove media liner from the rewind or peel spindle, complete these steps:
1. Has the media run out?
Important • It is not necessary to turn off the power to remove media liner from the spindle.
If power is turned off, all label formats and images, as well as any temporarily saved
parameter settings stored in the printer’s internal memory, are lost. When power is turned
back on, these items must be reloaded.
If... Then...
No a. Create slack in the media liner by rotating the spindle slightly
clockwise.
b. Cut or tear the media liner at the spindle.
Ye s Continue with the next step.
Rewind
Peel
Rewind
Peel