Filter
Top Products
Operations
Load Media in Tear-Off Mode
36
14068L-001 Rev. A X-Plus II User Guide 1/11/07
To load roll media, complete these steps:
1. Set the printer to Tear-Off mode. See Select Print Mode on page 65 for instructions.
2. Insert media into the printer. See Prepare the Media for Loading on page 32 for
instructions.
3. Place the roll of media on the media supply spindle. Push the roll back as far as it will go.
4. Open the printhead assembly by rotating the printhead-open lever (1) counter-clockwise.
Caution • While performing any tasks near an open printhead, remove all rings, watches,
hanging necklaces, identification badges, or other metallic objects that could touch the
printhead. You are not required to turn off the printer power when working near an open
printhead, but Brady recommends it as a precaution. If you turn off the power, you will lose
all temporary settings, such as label formats, and you must reload them before you resume
printing.
1