Filter
Top Products
Specifications
Print Specifications by Model
180
14068L-001 Rev. A X-Plus II User Guide 1/11/07
Print Specifications by Model
Refer to the key and the table that follows for printer specifications.
Specifications Key
Non-Continuous printing (gap, notch, or hole between labels).
Continuous printing (no gap, notch or hole).
Ladder (rotated) orientation.
Picket fence (nonrotated) orientation.
Print Specifications BP-300X-Plus II BP-600X-Plus II BP-360X-Plus II
Printhead resolution 300 dots/inch
(12 dots/mm)
600 dots/inch
(24 dots/mm)
300 dots/inch
(12 dots/mm)
Dot size
(width×length)
0.0033×0.0033 in.
(0.84×0.084 mm)
0.0016×0.0016 in.
(0.042×0.042 mm)
0.0033×0.0033 in.
(0.84×0.084 mm)
First dot location
(measured from inside
media edge)
0.023 ± 0.035 in.
(0.6 ± 0.9 mm)
0.023 ± 0.035 in.
(0.6 ± 0.9 mm)
0.10 ± 0.035 in.
(2.5 ± 0.89 mm)
Maximum print width 4.09 in. (104 mm) 3.2 in. (81 mm) 6.6 in. (168 mm)
Selectable print speeds
(inches per second)
2.4, 3 through 8 1.5, 2 through 4 2.4, 3, 4, 5, 6, 7, 8
Maximum Print length 39 in. (991 mm)
100 in. (3810 mm)
39 in. (991 mm)
39 in. (991 mm)
39 in. (991 mm)
100 in. (3810 mm)
Bar code modulus (X)
dimension
3.9 mil to 39 mil
3.33 mil to 33 mil
1.6 mil to 16 mil
1.6 mil to 16 mil
3.9 mil to 39 mil
3.33 mil to 33 mil
Thin film printhead with
Element Energy Equalizer
(E
3
)
®
Yes Yes Yes