Filter
Top Products
Routine Maintenance
Clean the Printhead and Platen Roller
126
14068L-001 Rev. A X-Plus II User Guide 1/11/07
To clean the printhead and platen roller, complete these steps:
1. Open the printhead assembly by rotating the printhead-open lever (1) counter-clockwise.
2. Remove the media and ribbon (if loaded).
Caution • The printhead may be hot and can cause severe burns. Allow the printhead to
cool.
Caution • Before touching the printhead assembly, discharge any built-up static electricity
by touching the metal printer frame or by using an anti-static wriststrap and mat.
1