Filter
Top Products
23
Printer Setup
Select a Communication Interface
1/11/07 X-Plus II User Guide 14068L-001 Rev. A
Data Cable Requirements
Ethernet cables do not require shielding, but all other data cables must be fully shielded and
fitted with metal or metallized connector shells. Unshielded data cables may increase radiated
emissions above the regulated limits.
To minimize electrical noise pickup in the cable:
• Keep data cables as short as possible.
• Do not bundle the data cables tightly with the power cords.
• Do not tie the data cables to power wire conduits.
Note • Brady printers comply with FCC Rules and Regulations, Part 15 for Class B
Equipment using fully shielded, 6.5 ft. (2 m) data cables. Use of unshielded cables may
increase radiation above the Class B limits.