Filter
Top Products
90
CHAPTER TEN
3
Press Set.
4
Press Record, then pick up the handset to record a message.
For example: “Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a fax,
please press
51, wait for the fax tones, then press the start button
on your machine.”
5
Replace the handset. The Message Manager plays your OGM.
6
Press Stop to exit.
Listening to the Outgoing Message (OGM)
1
Press Menu, 1, 8, 3.
2
Press or to select TAD MESSAGE (or F/T MESSAGE or
PAGING MSG.).
3
Press Set when the screen displays your selection.
4
Press Play to hear the OGM. Adjust volume by pressing Volume
or .
5
Press Stop to exit.
Erasing the Outgoing Message (OGM)
1
Press Menu, 1, 8, 3.
2
Press or to select TAD MESSAGE (or F/T MESSAGE or
PAGING MSG.).
3
Press Set when the screen displays your selection.
4
Press Erase.
5
Press 1 to erase the OGM —OR— Press 2 to exit without erasing.
6
Press Stop to exit.
Activating Message Manager Mode
To activate Message Manager.....
Press Mode until both Fax and F/T lights are on.
...Then you can easily identify the Message Manager Mode is on by
viewing the Message Manager indicator lights.
See
“Recording
the Fax/Tel
Outgoing
Announcement”
chap. 5
TAD
Fax
F/T