Filter
Top Products
33
INITIAL SETUP
Special characters and symbols
Press
for (space) ! ” # $ % & ’ ( ) + , - . /
Press # for : ; < = > ? @ [ ] ^ _
Press 0 for Ä Ë Ö Ü À Ç È É 0
Setting the Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The machine comes
with this volume set to LOW. When the beeper is set to LOW or HIGH,
the machine beeps every time you press a key or make an error, and at
the end of sending or receiving a fax.
1
For the MFC-9050, Press Menu, 1, 4.
For the MFC-9550, Press Menu, 1, 1, 4.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Set.
4
Press Stop to exit.
PABX and TRANSFER
Your machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a central
telephone system or Private Automatic Branch Exchange (PABX). Your
fax can be connected to most types of PABX. You can easily gain access
to the outside line from your fax connected to PABX by just pressing R.
Also, you can transfer a call to another extension by pressing R.
Setting PABX
If your machine is connected to a PABX system, set PBX:ON. If not, set
OFF.
1
For the MFC-9050, Press Menu, 1, 5.
For the MFC-9550, Press Menu, 1, 1, 5.
The screen displays
PBX:OFF
SELECT { } & SET
2
Press or to select ON (or OFF).
3
Press Set when the screen displays your selection.
4
Press Stop to exit.