Filter
Top Products
25
ON-SCREEN PROGRAMMING
2. SETUP RECEIVE
Function Description Factory Set Chapter
1. RING DELAY Number of rings before the
RING DELAY:02
5
machine answers in Fax/Tel
TOLL SAVER:OFF
(F/T), Fax or TAD (Message
(MFC-9550)
Manager for MFC-9550) mode.
2. F/T RING TIME
Sets the time for F/T pseudo-ring
30 5
in Fax/Tel (F/T) mode.
3. FAX DETECT Receive fax messages without ON 5
pressing the Start key.
4. REMOTE CODE Enter code to activate or OFF 5
deactivate your machine from a (
51, #51)
remote location.
5. REDUCTION Reduces size of image. AUTO 5
6. MEM. RECEIVE Automatically stores any ON 5
incoming faxes in its memory
if it runs out of paper.
7. PRINT DENSITY Adjusts printing to be lighter or -- 5
darker.
8. POLLING RX You call another fax machine to -- 5
receive a fax from it.
9. TONER SAVE Increase life of toner cartridge. OFF 5
0. PC INTERFACE ON/OFF ON 5
(Only for MFC-9550)
3. SETUP SEND
Function Description Factory Set Chapter
1.
COVERPG SETUP
Automatically sends a OFF 6
programmable cover page or
prints a sample cover page.
2.
COVERPAGE NOTE
Program a customized message -- 6
for fax cover page.
3. CONTRAST Change the lightness or darkness AUTO 6
of a fax you are sending.
4. RESOLUTION Allows you to change STANDARD 6
resolutions page by page.
5. OVERSEAS MODE Special setting for international OFF 6
transmissions.
6. CALL RESERVE You can send a fax, then speak OFF 6
to the person operating the
other fax machine or print a
sample call back message.
7. TIMER Set the machine to send your -- 6
documents later.
8. POLLED TX Set Polled Transmission for -- 6
someone to poll your fax machine
to receive a fax from you.
9. REAL TIME TX NEXT FAX ONLY/ON/OFF OFF 6