Filter
Top Products
96
CHAPTER TEN
Fax Forwarding/Paging
When Paging is set to ON, your machine dials the phone number you
have programmed and, when connected, plays the Paging OGM message
you have recorded. This lets you know you have a fax or voice message
in the Message Manager memory.
When Fax Forwarding is set to ON, your machine dials the fax machine
phone number you’ve programmed, and forwards any faxes you’ve
received.
You cannot use Paging and Fax Forwarding at the same time.
Programming a Fax Forwarding Number
1
Press Menu, 1, 8, 6.
2
Press or until the screen displays
FAX FORWARD
3
Press Set. The screen prompts you to enter the number of the fax
machine where faxes will be forwarded.
FWD#:
ENTER & SET
4
Enter the forwarding number (up to 20 digits).
5
Press Set.
6
Press Stop to exit.
You can change a Fax Forwarding number remotely.
Recording the Paging Outgoing Message (OGM)
Before paging can work, you should first record the Paging OGM.
1
Press Menu, 1, 8, 3. The screen prompts you to choose an OGM.
TAD MESSAGE
SELECT { } & SET