Filter
Top Products
39
SETUP RECEIVE
Setting the Ring Delay
The Ring Delay setting determines the number of times the machine
rings before it answers.
1
For the MFC-9050, Press Menu, 2, 1.
For the MFC-9550, Press Menu, 1, 2, 1.
If you have a MFC-9050, go to Step 4.
2
Press or to select RING DELAY.
3
Press Set.
4
Press or to select how many times the line rings before the
machine answers (01-04 or 02-04 for IRE).
5
Press Set when the screen displays your selection.
6
Press Stop to exit.
Setting the F/T Ring Time
You need to determine how long the machine will notify you with its
special F/T pseudo-ring when you have a voice call. This ringing
happens after the initial ringing from the phone company. Only the
machine rings, for 20, 30, 40 or 70 (for the U.K. and others) or 20, 30,
40, or 55 (for IRE) seconds; no other phones on the same line ring the
special F/T pseudo-ring.
1
For the MFC-9050, Press Menu, 2, 2.
For the MFC-9550, Press Menu, 1, 2, 2.
2
Press or to select how long the machine will ring to alert you
that you have a voice call.
3
Press Set when the screen displays your selection.
RING TIME:30 SEC
4
Press Stop to exit.
Now, when a call comes in and the machine is set to Fax/Tel (F/T)
Mode, all phones on this line will ring the number of times you selected
in Ring Delay.
You can let the machine pick up and detect if it’s a fax or voice call. If
it’s a fax call, the machine prints the fax. If it’s a voice call, the machine
signals you with an F/T pseudo-ring for the length of time you selected
in F/T Ring Time.
See
“Operation
from an
External or
Extension
Telephone”
and
“For Fax/Tel
(F/T) Mode
Only”
in this
chapter
See
“Operation
from
Extension
Telephone”
in this
chapter