Filter
Top Products
72
CHAPTER SIX
2
If you have more than two jobs waiting, use or to select the
job you want to cancel. Press Set when the screen displays your
selection.
—OR—
If you have only one job waiting, go to step 3.
#02 SALES REPORT
1.CLEAR 2.QUIT
3
Press 1 to cancel —OR— Press 2 to exit without cancelling.
To cancel another job, return to step 2.
4
Press Stop to exit.
If the machine is busy, press Stop, then follow Steps 2 through 4 to
cancel a job.
You can check which jobs are remaining in memory by following Steps 1
and 2 above.
Interrupting Delayed Fax and Polling
Transmit Jobs
You can send a fax without cancelling the Timer or Poll Waiting with
documents in the feeder by “interrupting” it. When you interrupt the
Timer to send a “new” set of documents, the machine will not
automatically redial the number if it was busy. Also, you cannot use the
function mode if you have interrupted the Timer or Poll Waiting.
1
For the MFC-9050, Press Menu, 5.
For the MFC-9550, Press Menu, 1, 5.
2
Wait 2 seconds, then remove the documents that are waiting in the
feeder.
INSERT DOCUMENT
3
Place the “new” document you want to send now in the feeder.
4
Enter the new fax number for the documents you want to send now.
5
Press Start.
6
After the transmission is finished, place the “old” documents back
into the feeder.
7
For MFC-9050, Press Menu, 5, for MFC-9550, Press Menu, 1, 5,
to restore the timer.