Filter
Top Products
Specifying Common Settings
5-17
Customizing Settings
5
Default Display after Auto Clear
You can set whether the screen specified as the Initial Function is displayed after
the Auto Clear mode initiates.
NOTE
•
The time necessary for Auto Clear to initiate can be set. (See "Auto Clear Time," on p.
5-42.)
•
The default setting is 'INITIAL FUNCTION'.
1
Press [Additional Functions] ➞ [ ] or [ ] until
<COMMON SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
The <COMMON SETTINGS> menu appears.
2
Press [ ] or [ ] until <AUTO CLEAR SET.> appears ➞
press [OK].
The <AUTO CLEAR SET.> menu appears.
OK
Additional
Functions
OK
COMMON SETTINGS
2.AUTO CLEAR SET.
AUTO CLEAR SET.
INITIAL FUNCTION