Filter
Top Products
Timer Settings
5-41
Customizing Settings
5
Auto Sleep Time
If the machine remains idle for a certain period of time (after the last print job or a
key operation is performed), it enters the Sleep mode. You can specify the time it
takes for the machine to enter the Sleep mode (from 3 to 30 minutes). You can also
set Auto Sleep Time to 'OFF'.
NOTE
•
The default settings are 'ON' and '5 MIN.'.
•
To enter the Sleep mode manually, press the control panel power switch.
•
The machine will not enter the Sleep mode when:
- the machine is in operation.
- all paper cassettes are empty.
- there is a paper jam.
- the toner cartridge is empty.
•
The machine will recover from the Sleep mode when:
- you press the control panel power switch.
- printing reports.
- a fax is received.
- the Delayed Transmission mode initiates.
- a print job is sent from a computer.
- a print job is sent via the network.
1
Press [Additional Functions] ➞ [ ] or [ ] until <TIMER
SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Current Date and Time," on
p. 5-38.
The <TIMER SETTINGS> menu appears.
2
Press [ ] or [ ] until <AUTO SLEEP TIME> appears ➞
press [OK].
The <AUTO SLEEP TIME> menu appears.
OK
Additional
Functions
OK
TIMER SETTINGS
3.AUTO SLEEP TIME
AUTO SLEEP TIME
ON