Filter
Top Products
Main Power and Control Panel Power
1-21
Before You Start Using This Machine
1
3
The screen shown below is displayed until the machine is
ready to scan.
If a message is displayed on the LCD display, proceed to step 4.
The machine is ready to scan in approximately 8 seconds (at a room temperature
of 68°F) after the screen above appears.
The screen below is displayed when the machine is ready to scan.
IMPORTANT
•
If you turn OFF the main power, wait at least 10 seconds before turning the main
power back ON.
•
Do not turn the main power OFF if the optional Super G3 Fax Board is installed,
and you want to be able to send or receive fax documents. Sending or receiving fax
documents cannot be done when the main power is turned OFF.
NOTE
•
The default copy settings are:
- Copy Ratio: Direct (100 %)
- Paper Selection: Auto Paper Selection
- Copy Density: Auto Density Control
- Copy Quantity: 1
- Image Quality: TEXT
- Copy Function: 1 to 1-sided copy
•
You can change the default copy settings to suit your needs. (See Chapter 3,
"Customizing Settings," in the Copying Guide.)
INITIALIZING...
100% AUTO
A TEXT
O1