Canon 2020 All in One Printer User Manual


 
Adjusting the Machine
7-35
Routine Maintenance
7
Adjusting the Machine
This section describes the settings to improve the print quality and to prevent paper
jams which may occur when a variety of functions are used.
Use of these settings will help to prevent a number of problems before they occur.
Print Quality and Density Improvement
If print quality decreases or an irregularity of the print density appears, the
transcription output may not work adequately. Use Special Mode M to improve the
print quality or irregular print density.
1
Press [Additional Functions].
The Additional Functions menu appears.
2
Press [ ] or [ ] until <ADJUST./CLEANING> appears
press [OK].
The <ADJUST./CLEANING> menu appears.
3
Press [ ] or [ ] until <SPECIAL MODE M> appears
press [OK].
The <SPECIAL MODE M> menu appears.
Additional
Functions
ADD. FUNCTIONS
1.COMMON SETTINGS
OK
ADD. FUNCTIONS
7.ADJUST./CLEANING
ADJUST./CLEANING
1.TRANS. ROLR CLEAN
OK
ADJUST./CLEANING
5.SPECIAL MODE M
SPECIAL MODE M
MID