Filter
Top Products
Specifying Common Settings
5-19
Customizing Settings
5
Tone Settings
You can set whether to sound audible tones. The following tones sound at the
following times:
• Entry Tone: When pressing keys on the control panel
• Error Tone: When a malfunction occurs (e.g., paper jam or
operational error)
• TX (Transmission) Job Done Tone: When a fax transmission completes
successfully
• RX (Reception) Job Done Tone: When a fax reception completes successfully
• Scan Done Tone: When scanning is complete
• Print Done Tone: When printing is complete
NOTE
•
The default setting is 'ON' for the Entry Tone and Error Tone, and 'ERROR ONLY' for the
TX Job Done, RX Job Done, Scan Done, and Print Done Tones. The tone volume is set
to '1' for every tone.
•
The maximum tone volume is '3'.
•
The volume can be set only when the Fax function is available.
1
Press [Additional Functions] ➞ [ ] or [ ] until
<COMMON SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
The <COMMON SETTINGS> menu appears.
2
Press [ ] or [ ] until <AUDIBLE TONES> appears ➞
press [OK].
The <AUDIBLE TONE> menu appears.
OK
Additional
Functions
OK
COMMON SETTINGS
3.AUDIBLE TONES
AUDIBLE TONES
1.ENTRY TONE