Filter
Top Products
Message Is Displayed
17
7-17
Media Too Small
Problem 1: The loaded media is smaller than any media size allowed for loading in the
printer.
Solution: Set the correct size media then try again. (ÆP.2-7, P.2-18)
Media Jam
Problem 1: Media has jammed in the printer.
Solution: Remove the jammed media then press the Online button. (Æ P.7-18)
Incorrect Media
Problem 1: The media type specified by the printer driver does not match the value for
the media in the paper feed source.
Solution: Confirm the type of media loaded in the printer, then select the media type
with the operation panel. (Æ P.2-17, P.2-24)
Solution: Pause the print job, use the printer driver to correct the media type so it
matches the loaded media, the re-start the job.
End of Roll
Problem 1: The roll media has run out.
Solution: Load another roll in the roll media tray, then press the Online button.
(Æ P.2-7)
Load Roll Media
Problem 1: The printer is waiting for roll media be loaded in the roll media tray.
Solution: Load the specified print media in the roll media tray and press the Online
button. (Æ P.2-7)
Remove Roll Media
Problem 1: The printer is waiting for removal of the roll media from the tray.
Solution: Remove the printed roll media from the tray then press the Online button.