Filter
Top Products
Troubleshooting
20
7-20
5
While restraining the center of the roll media, turn the roll holder to
take up any buckle in the media, pull the roll release lever toward you,
then lock the paper guide.
6
Rotate the roll holder in the direction of the arrow until the edge of the
roll media reaches the edge of the paper guide.
Turn the roll until approximately 1~2 mm of the leading edge of the roll
media is visible below the paper guide.
7
After closing the roll media tray, close the tray.
Firmly push the roll media tray completely into the printer.
“Roll Media Type” is displayed on the operation panel.
1~2mm