Filter
Top Products
vii
vii
TMoving the Printer
z The W7200 printer unit weighs 72 kg (159 lb.), and the W7250 printer unit
weighs 60kg (132 lb.). To prevent personal injury from back strain, etc.,
lifting the printer requires at least two people, one on either end of the
printer.
z When lifting and moving the printer, separate the printer from the stand,and
firmly grip the handles provided below each side of the printer. Gripping
either side of the printer at any other location is not safe and could cause
the printer to fall and cause personal injury.
TPower Supply
z To avoid damaging the power plug, which could cause a short circuit and
cause a fire or electrical shock, never pull on the power cord to unplug the
cord from the power supply. Always grip the plug to remove it from the
power supply.
z To avoid a fire or electrical shock, do not use an extension cord.
z To prevent fire or electrical shock, never use a power supply source other
than the one rated for the printer in the country where you purchased the
printer.
AC 100-240 V, 50/60 Hz
TCleaning the Printer
z To avoid minor burns or minor injury from moving parts, before cleaning the
printer always press the Power button to switch off the printer then unplug
the power cord from the power supply and allow the electrical contacts
inside the printer to cool.
TPrinthead and Ink Tanks
z Store the ink tanks out of the reach of small children. If a child accidentally
ingests ink from an ink tank, contact a physician immediately.
z To avoid staining clothing or your work area with spilled ink, never shake or
drop the printhead or an ink tank.
z The electrical contacts of the printhead become extremely hot during
normal operation. To avoid minor burns, never touch the electrical contacts
after removing the printhead from the printer.