Filter
Top Products
Troubleshooting
4
7-4
Problem 5: Printer is still warming up.
Solution: Immediately after the printer is switched on, it cannot print because it
needs a several seconds to warm up. After switching on the printer, you
must wait for the Online lamp to light and remain on.
Cannot Install Windows Printer Driver
Problem 1: Incorrect installer CD-ROM mounted.
Solution: Mount the User Software CD-ROM provided with the printer.
Problem 2: Provided User Software CD-ROM is damaged.
Solution: Call for service and request a new installer CD-ROM.
Problem 3: Windows operating system is unstable.
Solution: If Windows displays a system error message such as “General Protection
Fault” or “Illegal Operation”, the computer system has become unstable.
Confirm the problem with the system and try to install again.
Problem 4: Installation does not complete successfully.
Solution: Delete the Printer icon then try to install again. (Æ Setup Guide)
Cannot Install Macintosh Printer Driver
Problem 1: Incorrect installer CD-ROM mounted.
Solution: Mount the User Software CD-ROM provided with the printer.
Problem 2: Provided User Software CD-ROM is damaged.
Solution: Call for service and request a new installer CD-ROM.
System Does Not Recognize the Printer
Problem 1: Interface cable is disconnected.
Solution: If the printer is connected via the USB or IEEE 1394 port, check the cable
connections at the printer and the computer. (Æ Setup Guide)