Filter
Top Products
Menu Settings Summary Tables
11
5-11
Sleep Timer
off, 5, 10, 20, 30, 40, 50, 60 min.
(Default: 20 min.)
Sets the time interval for the printer to
remain idle before it enters the sleep
mode. If set off, the printer never
enters the sleep mode.
EOP Timer
10, 30 sec.; 1, 2, 5, 10, 30, 60 min.
(Default: 60 min.)
Sets the job timeout setting for the
printer.
Replace P.head No*, Yes
Sets the printer in the replace printhead
mode.
Adjust Printer
Auto Print On*, Off
Automatically prints Pattern A after
replacing the printhead.
Print Pattern A
Adj. Setting A
Adj. Setting B
Adj. Setting C
Adj. Setting D
Adj. Setting E
Adj. Setting F
Adj. Setting G
Adj. Setting H
Adj. Setting I
Adj. Setting J
Adj. Setting K
Allows you to adjust the alignment of
the printhead to correct color and the
direction of printing. Print Patterns A
to K for each step of adjustment.
Print Pattern B
Adj. Setting L
Adj. Setting M
Adj. Setting N
Adj. Setting P
Adj. Setting Q
Adj. Setting R
Adj. Setting S
Adj. Setting T
Adj. Setting U
Adj. Setting V ~ Z
Allows you to adjust the amount of
feed for the media. After selecting the
media type, print the pattern for the
adjustment and set the value for each
type. (L: Plain Paper, M: Coated
Paper, N: Heavy Coated Paper, P:
Glossy Paper, Q: Photo Glossy Paper,
R: Photo Semi-Glossy Paper, S:
Glossy Film, T: Back Print Film, U:
Proofing Paper, V~Z: Special 1 ~5)
Move Printer No*, Yes
Sets the printer to the mode that
enables you to carry out the
procedures required before shipping
the printer to another location.
Stand
*6
Use*, No Use
Sets the W7250 for installation of the
optional stand.
IP Setting
IP Address
Subnet Mask
Default G/W
—
Allows you to set the network
information for a TCP/IP network
interface. After making each TCP/IP
settings, be sure to execute “Regis.
Settings” to enable the settings.
Regis. Settings Yes*, No
Enables all the settings previously
adjusted for the network interface.
Menu Item Available Settings Function