Filter
Top Products
Printing Photographs Directly from a Digital Camera
42
About “Layout”
When “Default setting” (selections based on the printer setting) is selected,
the printer operates based on the “Borderless Printing” setting made using
the remote control.
When 10×15cm/4"×6" is selected from “Paper size”, “2-up”, “4-up”, “9-up”,
and “16-up” options may be available in “Layout”.
note
Printing on Photo Stickers
Specify the Paper size, Paper type, and layout for the Photo Stickers provided by
Canon.
Paper size: 10×15cm/4"×6"
Paper type: Photo
layout: 16-up
For instructions on how to load Photo Stickers, see “Loading Paper” on page 18.
About “Image optimize”
When “Default setting” (selections based on the printer setting) is selected,
the printer operates based on the “POP” and “VIVID Photo”, “Noise
reduction”, “Color Adjust” settings made using the remote control.
If you use a Canon PictBridge- compatible camera, you can select “VIVID”,
“NR”, or “VIVID+NR”. (Note that these options cannot be selected for some
models.)
note
•When “POP” (Photo Optimizer PRO) is selected, automatically corrects the image
brightness and color.
•When “VIVID” is selected, green and blue portions of photos are printed vividly.
•When “NR” (Noise Reduction) is selected, noise in blue portions, such as the sky,
and dark portions is removed.
•When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are performed.
About “Date print”
“Date Print” depends on the settings made using the controls of the camera.
note
• This printer can handle only Exif/JPEG image data to produce photos using
PictBridge.
• Never disconnect the USB cable during printing.
• When disconnecting the USB cable between the digital camera and printer, follow
the instructions given in the Instruction Manual of the camera.
• Controls of the digital camera cannot be used for the following:
– Print quality setting
– Printer maintenance