Printing with the computer
49
Printing with the computer
Installing the Printer Driver
Installing the Printer Driver—Windows
note
• Use a computer equipped on which Windows XP or Windows 2000 can operate.
• Do not disconnect the cable or remove the CD-ROM during the installation. The
driver cannot be correctly installed.
• The screens below refer to Windows XP installation. Screens may differ depending
on the operating system you are using.
• When installing the printer driver in Windows XP or Windows 2000, log on to the
system as a member of the Administrators group.
• If the following screen appears automatically, click
Cancel to quit the screen and turn off the printer.
Next, remove and replace the USB cable connected
to your computer. Then follow steps 3 to 12 to
install the printer driver.
1
Prepare the Printer.
See “Easy Setup Instructions” on page 3.
2
Ensure that the printer and computer are turned off.
3
Turn on the computer and start Windows. If any applications
automatically run, quit them.
Disable any anti-virus programs.
Do NOT turn the printer on at this stage.
4
Place the
Setup Software & User’s Guide
CD-ROM in the CD-ROM drive.
OFF