Filter
Top Products
Appendix
79
Caution
You may cause injury or damage the printer if you ignore any of these safety precautions.
About the Lithium
Coin Cell Battery
CR2025
Use a lithium coin cell battery CR2025. If you use an incorrect one, an explosion may occur.
Discard used batteries according to the local laws and regulations.
Do not heat or throw the battery into a fire or soak it into water. It may cause fire or personal
injury due to a battery explosion or liquid leakage.
Do not disassemble, modify, or heat a battery. It may cause personal injury due to liquid
leakage. If battery leakage occurs, thoroughly wash the affected skin and clothes. Keep
battery acid away from your eyes and mouth.
Keep a battery away from children. If your child swallows the battery, contact your doctor
immediately. It may cause severe damage to stomach and intestinal tissue.
Before you discard a battery, cover the terminals with tape or other insulators to prevent
direct contact with other objects. Contact with the metallic components of other materials in
waste containers may lead to fire or explosions.
Choosing a location
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight,
outdoors, or close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation
free).
Do not place the printer on a thick rug or carpet.
Power supply
Ensure that the area around the power outlet is kept clear at all times
so you can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord.
Never use a power supply source other than the one rated for the printer in the country where
you purchased the printer.
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Working around the
printer
Never put your hands or fingers in the printer while it is printing.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
(alcohol, thinners, etc.) on top of the printer.
If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for
service.
Print heads and ink
tanks
For safety reasons store print heads and ink tanks out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
Do not shake print heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.