Filter
Top Products
22
A
BINDER SIDE
Step 5: To remove the Rear Cabinet/Cover (B) of the Professional Puncher-A1,
1. Remove the 5 screws on Exit side and 2 screws on Entrance side.
2. Slide
the Rear Sheet Metal Cabinet/Cover off of the Professional Puncher-A1.
NOTE: You do not need to lift upward and you do not need to remove
the Top Cover.
B
Step 6: To remove the J2 Flipper (C), Door Latch.
A. Remove only one (the one closest to the frame) of the “E” Rings of
the J2 Flipper on the right end (front Door side).
B. Push the J2 Flipper in toward the front Door until it clears the rear
frame.
C. Pull the entire J2 Flipper, Door Latch out and set it aside.