Filter
Top Products
33
Executing Professional Punch A1
Ver.: 04.15
Press <Enter> to run Bootloader or <ESC> if machine is always BUSY
New Software is installed
Disconnect cable
Restart Professional Punch
The yellow items are commands typed by the user to run the boot loader.
The green items are the responses from the boot loader in the Hyper Terminal
window.
Following the steps above, the Hyper Terminal Screen should look like this:
BOOTLOADER>V
Pro Punch A1
Ver.: 04.14
BOOTLOADER> Downloading ...
0xF00000
Successful download of Professional Punch A1
Ver.: 04.15
Begin downloading .hex file or enter a command listed below in <>:
<G>o execute the new downloaded code or display code <V>ersion
BOOTLOADER>V
Professional Punch A1
Ver.: 04.15
BOOTLOADER>G
Executing Professional Punch A1
Ver.: 04.15
Press <Enter> to run Bootloader or <ESC> if machine is always BUSY
The proper settings for the serial port for boot loader communications are:
Port: COM5
BPS 19200
Bits 8
Parity None
Stop 1
Flow XON / XOFF