Filter
Top Products
42
6.4 SERVICE
• Should your Professional Puncher-A1 require service contact your local authorized
service representative.
• There are NO user-serviceable parts inside the machine. To avoid potential
personal injury and/or property damage, DO NOT REMOVE THE MACHINE’S
COVER.
• It is recommended that your Professional Puncher-A1 receives preventative
maintenance every 6 months or sooner depending on usage.
6.5 PROBLEM SOLVING, OPERATOR LEVEL PROFESSIONAL
PUNCHER-A1
Problem Probable Cause
No power, won’t punch Power cord not attached to back of machine or
not properly plugged into the wall
Power On/Off Switch not activated
Die Set will not come out using
a moderate pull
The Die Set is in partial cycle. Turn the Die Set
knob to the HOME position. The Die Set
should now slide out easily.
Also see PAPER JAMS.