Filter
Top Products
3
3-5 Using a densitometer
Using a densitometer
ColorWise Pro Tools are designed to work with the X-Rite DTP32 reflection
densitometer where color measurements are entered automatically. When you
cannot obtain an expected result with ReaderCal, use this procedure.
NOTE: Measurements from other densitometers can be input using a simple
ASCII file format (see page C-1).
Setting up the densitometer
Before you calibrate the iR C2100/2100S, you need to connect, configure,
and calibrate the densitometer to prepare for measuring the printed patches
(see “Calibrating the densitometer” on page 3-7). For additional information
about setting up and using the densitometer, see the documentation included
with it.
TO CONNECT THE X-RITE DTP32 TO THE COMPUTER:
1. Turn off the computer.
2. Plug the square end of the interface cable (looks like a modular phone plug)
into the I/O port on the side of the X-Rite DTP32.
Square connecto
r