Filter
Top Products
3
3-6 Color Calibration
3. Attach the connector to the computer.
For a Windows computer, insert the 8-pin mini-DIN end of the interface
cable into the 9-pin DB9 Connector cable adapter. Insert the 9-pin end into
the COM1 or COM2 port on the computer and tighten the screws. If the
available port on your computer is 25-pin, you must use the 8-pin-to-25-pin
adapter.
For a Mac OS computer, connect the 8-pin mini-DIN plug directly into the
serial port of the computer.
NOTE: For Macintosh computers with a USB port (for example, an iMac) you
need an adapter to connect the DTP32 to your computer. See the X-Rite,
Inc. web site (www.x-rite.com) for information on supported adapters.
Square connecto
r
Unused connector
Connect to computer
Interface cable
Connect to adapter
Unused connector
Connect to serial port