Filter
Top Products
3
3-7 Calibrating the densitometer
4. Use the AC adapter to provide power.
Plug the small connector on the adapter cable into the side of the X-Rite
DTP32 and plug the adapter into a wall outlet.
5. Turn on the computer.
6. Calibrate the densitometer (see page 3-7).
7. Use ColorWise Pro Tools to calibrate the iR C2100/2100S (see page 3-8).
Calibrating the densitometer
You will need the black-and-white X-Rite Auto-Cal Strip included with the
densitometer. Calibrating the densitometer does not require
ColorWise Pro Tools.
TO CALIBRATE THE X-RITE DTP32:
1. Connect the densitometer to the computer and supply power (see page 3-5).
2. From the Main Menu on the X-Rite DTP32 display, press the p1 key once to
reach p2.
3. Press the cal key.
Calibrating motor speed is displayed, followed by the words INSERT CAL
STRIP
.
AC adapter
Small connector