Filter
Top Products
C
C-3 Importing densitometer measurements
Example of 1D Status T density for an arbitrary page
This file format is used to specify the Status T density measurements of a
user-defined patch page. The value in the first column is the ink/toner
percentage of the patch. The first percentage must be 0 and the last
percentage must be 100. The percentages must increase in between.
#!EFI 3
# EFI ColorWise 2.0 Data
type: 1DST
# percnt Cyan Magent Yellow Black
0.0000 0.0300 0.0400 0.0200 0.0400
0.3922 0.0600 0.0700 0.0800 0.0700
1.1765 0.1000 0.1000 0.1000 0.1000
(…more data…)
98.0000 1.6700 1.3400 0.8900 1.6700
100.0000 1.7200 1.4300 0.9300 1.7500