Filter
Top Products
62 Cisco Unified Web and E-Mail Interaction Manager Installation Guide
Changing security credentials for network directory
This section describes the procedure for configuring network directory security credentials for each Unified
WIM and Unified EIM virtual directory. These steps are required when the web server and the file server are
installed on different machines. Repeat the procedure for each partition.
To change the network directory security settings:
1. Go to Start > All Programs > Administration Tools > Internet Information Services (IIS) Manager.
2. Browse to Web Sites > Default Web Site.
3. Right-click the Cisco virtual directory and click Properties.
4. In the virtual directory properties window, go to Virtual Directories tab and select the following options:
In the The content for this resource should Come from: section, select the A share located on another
computer option.
Provide the Network directory name and click the Connect As button.
Click the Connect As button
5. In the Network Directory Security Credentials window, change the following configurations and click OK.
Provide the user name and password of the domain user.
Clear the Always use the authenticated user’s credentials when validating access to the network
directory option.
Important: This procedure is required only in collocated or distributed-server deployments.