Filter
Top Products
SSL for secure connections 95
6. In the Secure Communications window, select the Require secure channel (SSL) and Require 128-Bit
encryption options. Click OK, and then click OK again to close the Properties window.
Configure the secure communications options
7. Restart the IIS Service. Make sure that both web sites have started.
Clients browsing to this virtual directory must now use HTTPS.
Configuring the viewing of attachments
To enable users to view attachments:
1. In Cisco_Home
\config\egpl_master.properties
:
a. Change the value of
webtemp.webdir
from
http://
Web_Server
/temp
to
https://
Web_Server
/temp.
Also, verify that the fully qualified domain name of the web server is
provided.
b. Change the value of
Task.Attachment.WebTemp
from
http://
Web_Server
/temp
to
https://
Web_Server
/temp.
Also, verify that the fully qualified domain name of the web server is
provided.
c. Change the value of
Live.Attachment.WebTemp
from
http://
Web_Server
/temp
to
https://
Web_Server
/temp
. Also, verify that the fully qualified domain name of the web server is
provided.
2. In
Cisco_Home
\config\egml_mailconfig.properties
change the value of
Attachment.WebTemp
from
http://
Web_Server
/temp
to
https://
Web_Server
/temp.
Also, verify that the fully qualified
domain name of the web server is provided.
Testing SSL access
To test SSL access to Unified WIM and Unified EIM:
1. Open your web browser.