Filter
Top Products
Post-installation tasks 73
Configuring some important settings
Settings allow you to configure various aspects of Unified WIM and Unified EIM. Some settings are configured
at the partition level, while others have to be set up for each department.
In this section, we describe certain settings that should be configured soon after installation. These settings are of
two types:
1. Mandatory settings: These settings must be configured before using Unified WIM and Unified EIM. These
include the settings related to ESMTP protocol, which must be configured if you are using ESMTP protocol
for exception and spam emails and notifications.
2. Optional settings: Although it is not mandatory to change these settings, you are likely to feel the need to
configure them for your business.
Mandatory settings
At the partition level
Make sure you configure the following settings for each partition.
Default SMTP server
Notifications mail SMTP Server
Notifications mail redirection from address
Notifications mail redirection to address
Configure the following partition-level settings only if you use ESMTP protocol for exception and spam emails
and notifications.
Exception mails SMTP user name
Exception mails SMTP password
SPAM mails SMTP user name
SPAM mails SMTP password
Notification mails SMTP user name
Notification mails SMTP password
At the department level
Configure the following setting for each department.
Default From address for alarm