Filter
Top Products
CHAPTER
3-1
Cisco 2010 Connected Grid Router Hardware Installation Guide
OL-31454-01
3
Installing and Connecting the Router
This document describes how to install and connect Cisco CGR 2010 routers to a LAN or WAN, as well
as how to connect AC or DC power to the router. The following sections provide technical details.
• What you Need to Know, page 3-3
• Before You Begin, page 3-4
• Unpacking the Router, page 3-4
• Installing the Router in a Rack, page 3-5
• Power-Supply Modules, page 3-8
• Connecting to a Console Terminal or Modem, page 3-17
• Installing the Cisco Microsoft Windows USB Device Driver, page 3-21
• Uninstalling the Cisco Microsoft Windows USB Driver, page 3-22
• Connecting to the Auxiliary Port, page 3-24
• Connecting WAN and LAN Interfaces, page 3-25
• Auxiliary Port, Console Port, and Adapter Pinouts for the Cisco CGR 2010 Router, page 3-26
• Connectors and Cabling for the 8-Port Asynchronous/ Synchronous RS-232 GRWIC, page 3-33
Note To see translations of the warnings that appear in this publication, see Cisco Connected Grid Routers
Series Regulatory Compliance and Safety Information.
Caution For the optimum temperature ranges, do not operate it in an area that less than the minimum of 40°C and
exceeds a maximum recommended ambient temperature of 60°C.
Note To view specifications for the CGR 2010 router, see the Cisco 2010 Connected Grid Router data sheet at:
http://www.cisco.com/en/US/prod/collateral/routers/ps10967/ps10977/data_sheet_c78_593509.html
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030