Filter
Top Products
Chapter 3 Configuring Open Shortest Path First (OSPF)
Configuring OSPF on the CSS
3-20
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
!************************** SERVICE **************************
service c100
ip address 1.1.1.100
!IP address for critical service
active
service s1
ip address 2.1.1.1
!IP address for service s1
keepalive method get
keepalive type http
active
service s2
ip address 2.1.1.2
keepalive method get
keepalive type http
active
!*************************** OWNER ***************************
owner admin1
content r1
add service s1
add service s2
vip address 1.1.1.10
!redundant VIP equals content VIP
active
Advertising a Default ASE Route
Routers use default routes when no additional routes exist to a particular AS
external destination. By default, an ASBR does not generate a default route into
the OSPF routing domain. Use the ospf default command to force the CSS to
generate a default ASE route and advertise the route through OSPF.
Before you enter the ospf default command, configure the CSS as an ASBR. For
more information, see the “Configuring the CSS as an Autonomous System
Boundary Router” section.
For example:
(config)# ospf default