Filter
Top Products
Chapter 4 Configuring the Address Resolution Protocol
Showing ARP Information
4-8
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
To display the global ARP configuration, enter:
# show arp config
Table 4-4 describes the fields in the show arp config command output.
To display the host IP addresses entered at initialization or boot time through
ARP, enter:
# show arp file
To display the ARP entries from the CSS management port, enter:
# show arp management-port
Table 4-5 describes the fields in the show arp management-port command
output.
Table 4-4 Field Descriptions for the show arp config Command
Field Description
ARP Response Timeout The time, in seconds, to wait for an ARP resolution
response before discarding the packet waiting to be
forwarded to an address. The time can be from 5 to 30
seconds. The default is 5 seconds.
ARP Flush Timeout The time, in seconds, to hold an ARP resolution result
in the ARP cache. The timeout period can be from 60
to 86400 seconds (24 hours). The default is 14400
seconds (4 hours). An entry of none or 86401
indicates the ARP entries will not timeout.
Table 4-5 Field Descriptions for the show arp management-port Command
Field Description
IP Address The IP address of the system for ARP mapping.
MAC Address The MAC address of the system mapped to the IP address.
Port The CSS Ethernet management port.