Filter
Top Products
Chapter1 Configuring Interfaces and Circuits
Configuring Interfaces
1-22
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
Showing Trunking Configurations
The CSS enables you to show VLAN trunk status information for Gigabit
Ethernet and Fast Ethernet ports. To display this information, use the show trunk
command.
Table 1-5 describes the fields in the show trunk command output.
Showing Interface Information
To display a list of valid interfaces for the CSS, use the show interface command.
For example:
(config)# show interface
To display information for a specific interface, enter the show interface command
and the interface name. Enter the interface name as follows:
• CSS 11501 - Enter the interface name in interface port format (for example,
e1 for Ethernet interface port 1).
• CSS 11503 or CSS 11506 - Enter the interface format in slot/port format (for
example, 3/1 for Ethernet port 1 on the I/O module in slot 3).
For example, to show interface information for port 1 on a CSS 11503, the I/O
module in slot 2, enter:
(config)# show interface 2/1
Table 1-5 Field Descriptions for the show trunk Command
Field Description
Port The CSS port
VLAN The VLAN on the port
Default VLAN The configured default VLAN on the port (if there is no
configured default VLAN, “None” appears in this field)