Filter
Top Products
Chapter1 Configuring Interfaces and Circuits
Configuring Interfaces
1-28
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
Single Collision The number of successfully transmitted frames on the
interface for transmissions that were inhibited by exactly
one collision.
Multiple
Collisions
The number of successfully transmitted frames on the
interface for transmissions that were inhibited by more than
one collision.
SQE Test The number of times that the SQE TEST ERROR message
is generated.
Deferred Tx The number of frames for which the first transmission
attempt on the interface is delayed because the medium is
busy.
The count represented by an instance of this object does not
include frames involved in collisions.
Internal Rx Errors The number of frames for which reception on the interface
failed due to an internal MAC sublayer receive error.
Frame too Long The number of frames received on the interface that
exceeded the maximum permitted frame size.
Carrier Sense
Errors
The number of times that the carrier sense condition was
lost or never asserted when attempting to transmit a frame
on the interface.
Internal Tx Errors The number of frames for which transmission on the
interface failed due to an internal MAC sublayer transmit
error.
Excessive
Collisions
The number of frames for which transmission on the
interface failed due to excessive collisions.
Late Collisions The number of times that a collision is detected on the
interface later than 512 bit-times in to the transmission of a
packet.
Table 1-9 Field Descriptions for the show ether-errors Command (continued)
Field Description