Filter
Top Products
Chapter 6 Configuring the Internet Protocol
Showing IP Configuration Information
6-16
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
Showing IP Statistics
Use the show ip statistics command to display aggregate TCP statistics for the
unit. Table 6-5 describes the fields in the show ip statistics output.
If The Index value that identifies the local interface through
which the next hop of this route should be reached.
Type The type of the route entry. The possible types are as follows:
• local - Local interface
• remote - Remote destination
• mgmt - Management interface
Proto The protocol for the route.
Age The maximum age of the route.
Metric The metric cost of the route.
Table 6-4 Field Descriptions for the show ip routes Command (continued)
Field Description
Table 6-5 Field Descriptions for the show ip statistics Command
Field Description
UDP Statistics
Input Datagrams The total number of flow-related UDP datagrams
delivered to UDP users.
No Port Errors The total number of received UDP datagrams for
which there was no application at the destination port.
Output Datagrams The total number of flow-related UDP datagrams sent
from the CSS.
Input Errors The number of received UDP datagrams that could not
be delivered for reasons other than the lack of an
application at the destination port.