Filter
Top Products
Chapter 3 Configuring Open Shortest Path First (OSPF)
Showing OSPF Information
3-40
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
Table 3-11 Field Descriptions for show ospf neighbors Command
Field Description
Address The IP address of the neighboring router’s interface to the
attached network. This address is used as the destination IP
address when protocol packets are sent as unicasts along
this adjacency. The IP address is also used in router LSAs
as the Link ID for the attached network if the neighboring
router is selected to be the designated router. The CSS
learns the neighbor IP address when it receives hello
packets from the neighbor.
Neighbor ID The OSPF Router ID of the neighboring router. The CSS
learns the Neighbor ID when it receives hello packets from
the neighbor.
Prio The router priority of the neighboring router. Contained in
the neighbor’s hello packets, this value is used by OSPF to
select the designated router for the attached network.