Filter
Top Products
6-13
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
Chapter 6 Configuring the Internet Protocol
Showing IP Configuration Information
Showing IP Global Configuration Parameters
Use the show ip config command to display IP global configuration parameters.
These parameters show the state (enabled or disabled) of the source route option,
forward IP broadcasts, record-route option, and IP route change logging. The
show ip config command also shows the value for the orphaned route timer.
Table 6-2 describes the fields in the show ip config output.
Table 6-2 Field Descriptions for the show ip config Command
Field Description
Source Route
Option
Indicates whether processing of source-routed frames is
enabled or disabled.
Forward IP
Broadcasts
Indicates whether forwarding IP broadcasts is enabled or
disabled.
Orphaned Route
Timer
The setting for the orphaned route timer.
Record Route
Option
Indicates whether processing with the record-route option
is enabled or disabled.
Multiple Equal
Cost Path
Algorithm
The setting for the equal-cost multipath selection
algorithm. The possible settings are as follows:
• Address - Choose among alternate paths based on IP
addresses
• Roundrobin - Alternate between equal paths in
roundrobin fashion
IP Route Change
Logging
Indicates whether logging IP route changes is enabled or
disabled.