Filter
Top Products
4-7
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-4580-01
Chapter 4 Configuring the Address Resolution Protocol
Showing ARP Information
Table 4-2 describes the fields in the show arp command output.
To display a summary of entries in the ARP resolution table, enter:
# show arp summary
Table 4-3 describes the fields in the show arp summary command output.
Table 4-2 Field Descriptions for the show arp Command
Field Description
IP Address The IP address of the system for ARP mapping.
MAC Address The MAC address of the system mapped to the IP address.
Type The resolution type for the entry: Dynamic or Static. The
Dynamic resolution type indicates that the entry was
discovered through the ARP protocol. The Static
resolution type indicates that the entry is from a static
configuration.
Port The CSS interface configured as the egress logical port.
Table 4-3 Field Descriptions for the show arp summary Command
Field Description
Static Entry The total number of static map entries in the ARP
resolution table (from a static configuration).
Dynamic Entry The total number of dynamic map entries in the ARP
resolution table (entries discovered through the ARP
protocol).
Total Entry The total number of static and dynamic entries in the ARP
resolution table.