Filter
Top Products
6-8 Upgrading the Minitower Computer
Writer: Holly Jahangiri Saved by: ACastle Saved date: 07/25/97 2:13 PM
Pages: 28 Words: 3072 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 278019-001
Removing the Riser
Brace
Before an expansion board can be installed or replaced, you
must remove the riser brace that holds the expansion riser
board.
To safely remove the riser brace, grasp it at both ends and pull it
out of the computer chassis. Use care when guiding the
assembly out of the unit to prevent damaging the boards.
✎
When reinstalling the riser brace, fully seat the expansion riser
board attached to the brace into the system board socket to ensure
complete electrical contact.
Removing the Riser Brace