Filter
Top Products
Reference Guide E-1
Writer: Holly Jahangiri Saved By: Holly Jahangiri Saved Date: 07/03/97 10:09 AM
Pages: 6 Words: 649 Template: d:\95office\templates\commapp.dot
File Name Appe.doc Part Number 278019-002
appendix
E
S
YSTEM
B
OARD
J
UMPERS AND
S
WITCHES
This section provides information for setting DIP switches after
upgrading the processor and for setting jumpers to
enable/disable passwords or clear the configuration memory
(CMOS).
✎
To change the system board jumpers, you must remove the
computer cover. For procedures on removing the computer cover,
refer to Chapter 5, "Upgrading Your Desktop Computer," or
Chapter 6, “Upgrading Your Minitower Computer.”
!
WARNING:
To reduce the risk of personal injury from hot
surfaces, allow the internal system components to cool before
touching.
CAUTION:
Be sure to turn off the computer before changing a
jumper setting or damage to the system board can result.