Filter
Top Products
Reference Guide 2-9
Writer: Holly Jahangiri Saved By: Alyce Klingler-Castle Saved Date: 06/10/97 4:36 PM
Pages: 11 Words: 1987 Template: d:\95office\templates\comm.dot
File Name Ch2 Part Number 278019-002
QuickLock/
QuickBlank
QuickLock/QuickBlank lets you disable the keyboard and
mouse interface and optionally blank the screen while
applications are running.
✎
To enable QuickLock/QuickBlank, you must first establish a
Power-On Password. Refer to the section, Establishing a Power-On
Password, earlier in this chapter, for instructions.
When QuickLock and QuickBlank are enabled through the
Security Management option in Computer Setup, entering a
QuickLock key combination (Ctrl+Alt+L) disables the keyboard
and the mouse interface. If QuickBlank is not activated, the
application remains in view on the screen, but it cannot be
accessed.
To re-enable the input device interface and access the
application, you must enter the Power-On Password that you
established in Security Management.
Enabling QuickLock and QuickBlank
To enable the QuickLock and QuickBlank features, complete
the following steps:
1. Turn on or restart the computer.
2. When the F10 Setup message appears in the lower-right
corner of the screen, press the F10 key.
✎
If you do not press the F10 key while the message is displayed,
you must turn the computer off, then on again to access the utility.
3. Press the Enter key to bypass the welcome screens and
display the main menu.
4. Select Computer Setup from the main menu and press the
Enter key.
5. Select the Built-In Devices option.
6. Select the Security Management option.
7. Locate the QuickLock and QuickBlank items, in the
Power-On Password section, and select Enable QuickLock
of the Keyboard.
8. Select any other QuickLock/QuickBlank preferences, then
select OK to exit the Security Management screen.