Filter
Top Products
Reference Information
Reference Guide 7–11
FAX Class 1
Command (Conexant)
+FAE=
n
Data/fax auto answer: 0=disable (default), 1=enable.
+FAR=
n
0=disable adaptive reception (default), 1=enable.
+FCL=
n
Set loss-of-carrier delay in units of 100 ms (
n
=0 to 255).
+FCLASS=
n
Set active service class: 0=data mode (default), 1=Fax Class 1,
1.0=Fax Class 1.0 mode, 8=voice mode.
+FIT=
n,a
Set DTE inactivity timeout n seconds after which modem goes
on-hook (
a
=0) or DCE goes on hook (
a
=1).
+FLO=
a
Set flow control type: 0=XON/XOFF and RTS/CTS flow control
turned off; 1=XON/XOFF flow control in either direction; 2=RTS
for flow control of modem by DTE, and CTS for flow control of
DTE by modem.
+FMI Report modem manufacturer.
+FMM Report modem model.
+FMR Report modem version, revision, or date.
+FPR=
n
Set DTE/modem interface rate in bits/sec: 0=automatic
detection (default).
+FRH=
n
Receive data with HDLC framing.
+FRM=
n
Receive data.
+FRS=
n
Receive silence,
n
×10 ms.
+FTH=
n
Transmit data with HDLC framing.
+FTM=
n
Transmit data.
+FTS=
n
Stop transmission and wait,
n
×10 ms.
319954-001.book Page 11 Thursday, February 3, 2005 3:03 PM